CROWN – DCI2X600-U-NPFX

397,199.00

Categories: ,

The DCi amplifiers offer exceptional performance with a frequency response of ±0.25dB (1W into 8Ω, 20Hz–20kHz) and a signal-to-noise ratio greater than 108dB. They feature balanced 3-pin block connectors for input and 2-pin terminal strips for output, supporting up to 10AWG wire. The devices include a 21-detent potentiometer for attenuation control and dimensions ranging from 3.5” x 19” x 14.25” to 3.5” x 19” x 19”. Weighing between 18.8 lbs and 30 lbs, these amplifiers utilize continuously variable speed fans for cooling. Additional network features include BLU link input, network monitoring and control, and GPIO ports. They operate on 100VAC–240VAC, 50/60Hz, with a power draw of less than 1W in sleep mode.

Whatsapp Us!

Enquiry Now

The DriveCore™ Install (DCi) Network Series amplifiers offer a comprehensive range of high-performance installation amplifiers based on proprietary DriveCore technology. They are engineered to the highest industry standards, providing advanced features and flexibility for complex 21st-century sound installations. The DCi Network Series is notable for its true rack density, delivering power points of 300W or 600W in 2-/4-/8-channel configurations, or 1250W/2400W in 2-/4-channel configurations—all within a 2 Rack Unit form factor. This compact design allows for efficient use of space, reducing operational costs and providing maximum installation flexibility.

The DCi Network Series supports both analog and digital inputs, featuring digital audio transport via HARMAN’s proprietary BLU link alongside balanced analog inputs. This dual-input capability offers a significant audio advantage at a lower cost, with a priority input router that automatically switches to an alternate input if the primary audio source is lost. The amplifiers also support network monitoring and control via the HiQnet™ protocol over standard TCP/IP. This feature enables remote monitoring and control of all networked DCi amplifiers, integrating seamlessly with Audio Architect software and the Powered by Crown app for comprehensive system management.

A standout feature of the DCi Network Series is its programmable General Purpose Input/Output (GPIO) ports, which can be configured for various applications, such as volume control, preset recall, or error reporting to third-party systems. The built-in Digital Signal Processing (DSP) capabilities include LevelMAX™ Limiters, input/output EQ, delay, matrix mixing, speaker line monitoring, and FIR crossover, providing extensive audio customization and optimization options.

The series also excels in audio networking, offering flexible integration with BSS Audio’s Soundweb London™ processors. This compatibility allows for seamless processing of various audio networking transports, including AVB, CobraNet, and Dante signals. The BLU-Link capabilities further enhance system integration, making the DCi Network amplifiers an all-encompassing solution for diverse audio environments.

The **DCi Analog Series** retains the hallmark features of the Network Series, with a focus on analog capabilities. It offers true rack density with power points of 600W in an 8-channel configuration or 1250W in a 4-channel configuration, all within a 2 Rack Unit form factor. This design supports **Direct Drive Constant Voltage**, enabling the use of smaller gauge wiring for either 70Vrms or 100Vrms speaker systems without needing a step-up transformer. This feature not only improves audio quality but also increases efficiency.

Both the Network and Analog Series offer **channel-independent Hi-Z/Low-Z selection**, allowing for flexible system design by powering various loads on a channel-by-channel basis. The amplifiers are capable of **bridgeable channel pairs**, even in 100Vrms mode, providing versatility for high-power applications such as subwoofers. Additionally, the **remote on/off interface** feature allows the amplifier to be integrated into a control system for power management, enhancing energy efficiency.

The amplifiers also feature a **highly efficient cooling design** with internal fans that direct airflow to the most heat-generating components, maximizing cooling efficiency while minimizing noise and energy waste. Furthermore, the **advanced Power Factor Correction (PFC) universal power supply** ensures efficient power delivery under various conditions, reducing heat and power dissipation.

In summary, the DriveCore Install Series amplifiers, whether Network or Analog, offer state-of-the-art performance and flexibility, making them ideal for a wide range of professional and commercial audio installations.

Specifications

Product Type
Wall Mount
Power
100 W
Weight
8.53 kg (18.8 lbs)
Warranty
1
Color
Black / white
Dimensions (W x H x D)
483 mm x 89 mm x 362 mm
Power Connector
15A IEC
Required AC Mains (+-10%)
100V-240V ~ 50/60Hz
Maximum Fan Noise (re dBA SPL @ 1M)
45
Load Impedance (Stereo/Dual Mode)
70Vrms and 100Vrms
Load Impedance Bridge Mono
140Vrms and 200Vrms

Reviews

There are no reviews yet.

Be the first to review “CROWN – DCI2X600-U-NPFX”

Your email address will not be published. Required fields are marked *