The Control 68HP is a high-output, full-range pendant loudspeaker from JBL Professional, designed to deliver exceptional sound reproduction and consistent coverage in environments with open ceilings and lively acoustics. Ideal for a wide range of applications, the Control 68HP excels in spaces such as retail stores, restaurants, hotels, casinos, fitness centers, convention centers, exhibit areas, conference rooms, atriums, museums, and transit centers. Its design is particularly suited for areas where aesthetic considerations or acoustic performance demands a pendant form factor.
Featuring a 110° coverage pattern, the Control 68HP enables effective sound distribution across large areas while minimizing the number of speakers needed. This efficiency not only reduces installation costs but also maintains high-performance levels. The pendant design of the Control 68HP integrates seamlessly into open-ceiling environments, blending both function and style.
The loudspeaker employs a coaxial driver configuration, which enhances sound clarity and consistency. The low-frequency driver has an 8-inch Kevlar™-reinforced cone, a large 2-inch CCAW voice coil, and a fiberglass voice coil former. This combination provides high power handling and durability, ensuring reliable long-term performance. The high-frequency driver is a 1-inch titanium dome compression driver with a Kapton™ voice coil former, designed to deliver high-fidelity sound with minimal distortion.
The Control 68HP features a conically-contoured constant directivity horn, which contributes to its wide 110° coverage pattern and consistent sound quality throughout the listening area. This design minimizes distortion and ensures a uniform sound experience across various positions in the room.
Installation is straightforward with the Control 68HP’s single-point mounting system, which includes a complete hanging cable setup for secure suspension. The system comes with two 4.5-meter (15-foot) high-tensile galvanized steel wire ropes, equipped with spring clips for the speaker end and UL-listed cable fasteners for height adjustment. This allows for easy and adjustable installation in open-ceiling applications.
The Control 68HP is equipped with a 68-watt multi-tap transformer for use with 70V/100V distributed audio systems and can be switched for direct 8-ohm voice-coil operation. Euro-style clip-in connectors facilitate wiring connections, and for outdoor or exposed environments, the speaker includes rubber boots to protect the input connectors. An optional terminal cover (MTC-60PC) is available for additional protection in direct-exposure locations.
Overall, the Control 68HP combines high output, superior sound quality, and easy installation in a sleek pendant design, making it an excellent choice for a variety of commercial and public spaces where both aesthetic and acoustic performance are crucial.
Specifications
Here’s a detailed breakdown of the Control 68HP loudspeaker in pointers:
– **System Frequency Range (-10 dB):** 52 Hz – 17 kHz
– **Frequency Response (±3 dB):** 72 Hz – 16 kHz
– **Power Capacity:**
– 150 Watts Continuous Pink Noise Power (600 Watts peak, 100 hrs)
– 250 Watts Continuous Pink Noise Power (1000 Watts peak, 2 hrs)
– 500 Watts Continuous Program Power (2 hrs)
– **Nominal Sensitivity:** 90 dB
– **Nominal Coverage Angle:** 110° conical
– **Directivity (Q):** 7.8
– **Directivity Index (DI):** 8.9 dB
– **Maximum Input Voltage:** 41.4 V RMS (2 hrs), 82.8 V peak
– **Rated Maximum SPL @ 1m:**
– 114 dB continuous pink noise
– 120 dB peak
– **Rated Impedance:** 8 ohms
– **Transformer Taps:**
– 70V: 68W, 34W, 17W, & 8.5W
– 100V: 68W, 34W, 17W
– **Transformer Insertion Loss:**
– 0.5 dB @ 8.5W
– 0.5 dB @ 17W
– 0.6 dB @ 34W
– 0.7 dB @ 68W
– **Recommended Protective High-Pass:** 60 Hz high-pass (24 dB/oct) for 8 ohm operation and all 70V/100V tap settings
**Transducers:**
– **LF Driver:** 209 mm (8 in) Kevlar™ reinforced cone, 50 mm (2 in) CCAW voice coil on fiberglass voice coil former
– **HF Driver:** 25 mm (1 in) compression driver, titanium dome, ferrite magnet assembly, Kapton™ voice coil former
**Enclosure:**
– **Material:** High impact polystyrene
– **Grille:** Zinc-plated steel grille with powder-coat finish, foam backing (removable for painting)
– **Environmental:** Exceeds Mil Spec 810 for humidity, salt spray, temperature & UV; IP44 splashproof rating
**Termination:**
– Two removable locking euro-block 2-pin connectors with screw-down terminals for bare wire
– Connectors are paralleled for input and loop-thru; Max. wire size: 12 AWG (2.5 mm²)
– Rubber terminal covers included
**Suspension:**
– Two identical suspension systems: main suspension cable and safety cable
– 4.5 m (15 ft) long 2 mm (0.077 in) high-tensile galvanized-steel wire rope with spring-clips and Gripple™ brand adjustable-height cable fasteners
– Cables have a SWL rating of 45 kg (99 lb)
**Product Compliance:**
– Listed per UL1480A Commercial and Professional Use, CSA C22.2 No. 205
– Transformer registered per UL 1876
– Compliant with IEC62368-1, CE, LVD, RoHS
– In accordance with IEC60849/EN60849
– Suspension system and Gripple® brand cable fastener listed per UL1598 and UL2239, TUV, and CSA Class 3426-01 & Class 3426-81
**Dimensions:**
– **Diameter:** 333 mm (13.1 in)
– **Height to top of cabinet:** 344 mm (13.6 in)
– **Height to top of suspension bracket:** 369 mm (14.5 in)
**Weight:**
– **Net Weight (each):** 7.5 kg (16.5 lbs)
– **Set Weight (Pair):** 17.2 kg (38.0 lbs)
**Included Accessories:**
– Two suspension cable systems
– Two 2-pin removable locking euro-block connectors
– Two rubber covers for euro-block connectors
**Optional Accessories:**
– MTC-PC60 top panel / terminal cover
**Colors:**
– Available in black or white (-WH); Paintable
**SKU Numbers:**
– JBL-C68HP/T (black)
– JBL-C68HP/T-WH (white)
Reviews
There are no reviews yet.